Confined Space Entry Training @ Safety Solutions and Supply
About this Training Course
This program is an 8 hour training program, inclusive of hands on learning, practical evaluation and a written assessment.
Safety Solutions and Supply is the premier training provider in developing your staff for the hazards of confined space work. The Confined Space Entry course is an 8 hour program designed to qualify and recertify workers as entrants, attendants and entry supervisors using a hands on approach. Our staff of professional trainers can either come to your site or provide training at our state of the art training center located in Central Florida.
The program addresses the expectations of CFR 1910.146(g). The program addresses the elements of the standard, atmospheric testing and control, horizontal and vertical entry methods, permit use and management, duties of entrants, attendants and supervisors, entry termination and emergency management and includes but not limited to the following modules:
- Confined Space Plans/Entry Permit
- Personnel Role & Responsibilities
- Confined Space Hazards/Risk Management
- Confined Space Equipment
- Confined Space Rescue
- Hazard Control/LOTO
- Case Studies
What does OSHA require with regard to Confined Space Training?
29 CFR 1910.146g states that the employer shall provide training so that all employees whose work is regulated by this section acquire the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under this section. Training shall be provided to each affected employee. Appendix A: 29 CFR 1910.146, Permit-required confined spaces standard 46 (g)(3) The training shall establish employee proficiency in the duties required by this section and shall introduce new or revised procedures, as necessary, for compliance with this section. (g)(4) The employer shall certify that the training.
Safety Solutions Training Programs and Facilities:
Safety Solutions and Supply has built a state of the art training center in Mulberry, Florida, located on Highway 60 accessible to both Tampa and Orlando. Our Gonzales Louisiana Facility is conveniently located right off Interstate 10. Our state of the art facilities and our subject matter experts will ensure that your employees receive the most current training message and that the message is comprehended with regard to real world situations. Safety Solutions and Supply’s NCCER ICTP certified instructors will also perform training on specific locations based on your program needs. Call today to schedule your training.